I remember the computer I played Commander Keen on as a child had a turbo button that I was forbidden to touch, what did this button actually do?

  • 50
    just because it could have been easily googled does not mean having a canonical answer on this site is not worthwhile. – Neil Meyer May 20 '19 at 15:29
  • 31
    @NeilMeyer Originally, this site's rules were that questions needed to show research effort. I don't know if that rule is still applies, but the primary purpose of this site was to be a place where people could get information that was otherwise not accessible. I think that ship has sailed, though. Questions that can be answered with little to no effort of research typically get voted much higher than questions that actually add information to the web, simply because the former is applicable to larger audiences. Makes me almost want to post a question like, "What does the command cat do?" – JoL May 20 '19 at 20:01
  • 17
    @JoL Or “How do I exit vim?” – Davislor May 20 '19 at 21:49
  • 16
  • 4
    @KamiKaze That's definitely not what the diamond mods should do. Stack Exchange is a user-driven community, the rules are set by the community, and enforced by voting. – pipe May 21 '19 at 8:00

The Turbo button originally adjusted the clock speed of the computer between the full speed of the machine and a slower speed intended to be compatible with something more industry standard. It wasn't at all uncommon for software to be written with a specific speed of hardware in mind and either fail to operate completely or operate in a way that was unusable at a faster speed.

(One example of this was the GATO submarine simulator, which was built to run on a stock IBM PC. The faster your computer, the faster your virtual submarine would go. By the 90's, it was easy to find hardware where you could zip across entire virtual world in a matter of seconds. The Turbo Pascal runtime had a more serious issue where programs built using it would fail to run entirely on machines fast enough to cause an overflow during a timing loop on startup.)

PC Accelerator boards had some interesting variations on the theme. Many of these boards could be disabled entirely with a switch to get back to the original, un-accelerated performance of the machine. (This feature wasn't completely without risk, because I remember at least one or two instances where I saw PC's that had these boards installed, but never enabled.) There were also a few boards that had finely adjustable clock rates. Much like overclocking today, the idea was to pick the fastest speed at which your specific hardware was stable. Some of these would also automatically defer selecting the faster clock rate at startup until the BIOS self check had passed. In an effort to avoid this sort of acceleration, IBM put a timing loop in the self check that would fail if the machine detected a faster clock rate... so waiting to select the faster rate would let the self check pass and then accelerate the machine.

All that said, the need for a button to slow a machine down wasn't all that commonplace. At the end of the era of Turbo Buttons, I think the biggest reason to have one was to put the text Turbo on the front of the machine, with whatever connotations of speed it implied.

  • 23
    Turbo Pascal fixup button. – Janka May 20 '19 at 16:44
  • 4
    I used to play the games Gorillas on QBasic, that used an empty for loop to slow down the animations, and worked on a 25Mhz machine. When you ran it on a faster machine, the animations were very fast and the game almost unplayable – fernando.reyes May 20 '19 at 18:47
  • 11
    I think it is also worth noting that many PC's had LED 'readouts' that showed the CPU speed when in/out of turbo mode. These LED displays had absolutely nothing to do with the actual speed of the computer, and were configured by an array of jumpers on the backplane that allowed you to configure whatever you wanted the display to show. For example, the LED display in a 486DX2/66 might be jumpered to show 66 when turbo was 'on' and 04 or 08 when the turbo was 'off'. But you could really set them to show anything... – Geo... May 21 '19 at 11:31
  • 8
    @Geo A few of us spent a day reassembling an old machine in a HS programming class just so we could make the turbo readout say 'FU'. Ah, maturity... – brhfl May 21 '19 at 20:49
  • 3
    @val Actually, there's no overlap. While there was a bug in Turbo Pascal's CRT (division by zero in a delay function if the computer clock didn't change when measuring the speed), it only happened around 300 MHz or so CPUs (early Pentiums, especially combined with the new tricks these employed to be even faster). There was no turbo button for those. – Luaan May 22 '19 at 6:53

The turbo button was implemented on machines with CPUs faster than the original IBM PCs. Some software relied on the CPU running at a certain speed to work properly, rather than using some external timekeeping mechanism to avoid running to fast.

With the turbo mode disabled via the button the computer would run at approximately the speed of an original IBM PC, for compatibility with that software. With it enabled the computer would run as fast as it could.

  • 7
    The speed varied. On 8MHz 8086s, the button would switch between 4.77MHz (IBM speed) and 8MHz; but later models still had turbo buttons even though they didn’t have a setting identical to the speed of the original PC. I had a 33MHz 386 which would run at 16MHz when the turbo button was toggled. – Stephen Kitt May 20 '19 at 12:37
  • 8
    Not to mention turbo buttons that simply disabled chache instead of changing clocks. – Raffzahn May 20 '19 at 13:44
  • 3
    Not just software. You may have been saddled with a peripheral board that ran only at 4.77MHz speed so you'd have to boot without turbo mode if you wanted to use the device. – davidbak May 20 '19 at 16:35
  • 3
    It might be noteworthy that as kids we were totally misled by the labeling at least in some cases - where enabling the (seemingly magic) Turbo button actually had the opposite of the expected effect. Also, an audible example would be Monkey Island, where the sound was distorted when running on a fast machine... IIRC, this seems to back this up. – kubi May 20 '19 at 18:28
  • I assume “speed“ and “faster” refers to the clock rate only, not instruction times or MIPS? – Michael May 21 '19 at 6:52

In addition to the other answers given:

I remember newer computers (up to the Pentium class) having such buttons.

I doubt that the Turbo button was connected at all in most later computers.

I suppose that the manufacturers of PC housings did not want change their production and therefore continued producing housings with a Turbo button (which was used for 8 MHz 8086 computers) although the button was not used for newer computers any longer (and Pentium computers could not be switched to 4.77 MHz frequency).

I remember some computers that could be switched between 33 and 66 MHz using the Turbo button. Maybe the manufacturers produced the housings to be compatible with such mainboards (but in 99% of all cases the button was not connected).

  • 3
    Certainly my first PC (an Escom Pentium 75 using the Intel Advanced/ZP motherboard) had a turbo button that wasn't connected to the motherboard - it still had fast (75MHz) and slow (25MHz) clock speeds, but these were selected using keystrokes, leaving the button redundant. – john_e May 20 '19 at 19:58
  • I think the last PC I had with a turbo button that actually did something was a Cyrix 6x86 (Socket 7). The turbo button on that PC switched the L2 cache on the motherboard on and off. – mnem May 20 '19 at 20:13
  • 5
    The turbo button on the case could sometimes be useful even if one's motherboard didn't have a connector for it. It could also be connected to the key-switch input if one wanted to disable the keyboard temporarily (e.g. in a household where cats might pounce an unattended keyboard), or--by cutting a couple wires and splicing them together--it could be used to mute the speaker. – supercat May 20 '19 at 20:29
  • There's a lot of "doubt" and "suppose" and "maybe" here. Do you have anything to back this up? – pipe May 22 '19 at 6:53
  • 2
    I had a Cyrix P150+ (roughly equivalent to a Pentium 100) that I ended up spending a day reinstalling Windows on because it had become dog-slow. When the fresh install of Windows was also slow, I hunted around for other causes, and eventually realised I had pressed the turbo button. So it was definitely connected on that 5th generation machine. – RB. May 22 '19 at 12:41

The turbo button selected between normal and slow speeds. Slowing the system was done by slowing down the CPU clock speed or disabling cache memory


386 and some early 486 board had still a Turbo button that slowed down the CPU speed. I had a Vobis 386 computer that had an 8 MHz/25 MHz 386. From what I recall in the manual was explained that was for reading copy protected floppies or software that didn't work at the higher speed.


The turbo button altered the speed on the computer, as some games would reply on the CPU speed in order to determine on how fast the game would run, and this would cause the program to run faster than intended the newer the computer got (however this isn't a problem with today's computers as we can emulate another cpu), so the turbo button was made in order to slow to computer so that it could run these programs. However, some made the computer run faster.

  • Welcome to Retrocomputing! Thank you for the answer, but it doesn't add anything that the other answers already have addressed. – DrSheldon May 23 '19 at 2:02

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.