Alright, you seem to already have the correct keymap file in
DEVS:keymaps/, as you seem to be able to use the Keymap in Workbench programs. That's good (otherwise you would have had to copy it from
"Extras 1.3:Devs/keymaps" to
Now open your Workbench disk and start the
Shell. In the Shell, type:
This will bring up a text editor showing the Amiga startup script (similar in vein to MS-DOS' autoexec.bat). In there look for a line similar to this:
usa1 or whatever keymap it loads to
e. Make very sure that you don't change anything else or you might have a hard time to fix it next time you try to boot Workbench. Now press Esc, which will bring you into command mode. You will see a lone
* at the beginning of the bottom line of the editor after which you can enter commands. Type
x and press the Enter key, which will save the changed file and exit the editor.
Next time you boot up Workbench it should have changed the CLI and Shell keymap to Español.
In case you don't find a line with
Setmap in the
Startup-Sequence, you will need to insert it there yourself. I would suggest somewhere before
LoadWB. Press Enter to create a new empty line and put the following command there:
Then perform the same saving as above (Esc, then
x, then Enter) and reboot.