4

How do I check old ZX spectrum cassettes work - the tapes are after all quite old?

I am fairly computer savvy (my life is a continual strand from that Speccy to this here Thinkpad - and many stations between :-)) and I have a mono cassette player so I figure I can sample the tapes to something like *.tzx and load them into an emulator. Is this really necessary? If it is necessary, is there a quicker way of determining whether the software is still OK?

  • is this your personal work? or software you can find somewhere else (already dumped) ? sampling+converting to tape format wouldn't see all errors probably (there is few or no error checking on tapes) – Jean-François Fabre Feb 11 at 15:42
  • 1
    It's a bit of both though mainly the later. The former is probably so dreadful I'm kinda in two minds if I wanna see it again ;-) – NickM Feb 11 at 16:43
  • It ought to be possible to sample the tape, then do some kind of analysis to determine whether the tones, bit spacing and so on are within spec. Maybe even do some deep inspection by making sure the data all makes sense for the target platform (no invalid opcodes, etc.). – snips-n-snails Feb 11 at 18:40
  • Thanks for the comments and, as is often the case with SE, it has set me off on a new tangent as well. There may be a few Fourier transforms in my near future. – NickM Feb 11 at 22:19
3

I guess some emulators have a direct MIC input for a quick check, but I prefer a little bit longer way.

First of all, I connect the tape with the PC (in fact, I have a "USB Walkman") and make a digital copy using Audacity, at the best quality I can (48 kHz sampling frequency, 16 or 24 bits). Save it as lossless WAV (NO MP3!)

With this record, I can do all necessary operations, e.g. cutting, speed corrections, filtering, volume correction ... The only thing you cannot fix are the dropouts. Dropout = dead. (But you can fix dropout in the leader tone if you need.)

The last step is to use any WAV to TAP / TZX converter. At this phase, you will get the digital version, suitable for archiving - or get a STOP sign, back to the Audacity, do something, try again...

Definitely a nice work for a weekend! :)

| improve this answer | |
  • I'm curious why you said no MP3. Does data not encode/compress well? – Ben Hillier Aug 24 at 9:57
  • @BenHillier I believe that the "master record" should be saved with no losses. Later you maybe use MP3 with sufficient bitrate, but you still have the master in the best quality available... – Martin Maly Aug 24 at 10:19

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.