I have an old computer from around 1995. It's from a computer brand that I've never heard of called Samanna Compu-Solutions. I am unsure of the model. The problem is, I only have one PS/2 port to work with. Since the computer is from 1995, there are no USB ports. The PS/2 port is labeled as a mouse port, and I've tried a keyboard on there to no avail. My question is: why isn't there a keyboard port? Without a keyboard, there's no way to get past the BIOS.

I'm also getting a CMOS checksum error. The computer is using the Award Modular BIOS v4.51PG. It has 64MB of RAM, and a Pentium MMX 233MHz CPU.

Keyboard error or no keyboard present
CMOS checksum error - Defaults loaded

Press F1 to continue, DEL to enter SETUP

Without a keyboard, I can't press F1 to continue, or press DEL to enter the setup.

I have tried:

  • Clearing the CMOS/removing the motherboard battery
  • Unplugging the keyboard and plugging it back in (while the computer is off, I've heard PS/2 is not hot swappable)

Basically, what I'm trying to solve is how I can use a keyboard and mouse at the same time. Any help would be appreciated.

  • 8
    Pictures might help to answer. – UncleBod Aug 25 '20 at 14:48
  • 6
    The CMOS checksum error just means your CMOS battery has run out and all the settings have been lost. – Mark Aug 26 '20 at 0:59
  • @Mark the thing is I've already replaced the CMOS battery twice. Could be a dead socket, though. – TheComputerMan Aug 26 '20 at 15:36
  • 4
    @TheComputerMan as long as you don’t enter the BIOS setup (once you’ve got a keyboard connected), the error will remain — the checksum won’t be fixed until you save the CMOS settings from the setup. Booting loads defaults when there’s a checksum error, but it doesn’t save them. – Stephen Kitt Aug 26 '20 at 16:21

Given your computer’s vintage, I’m going to guess that the reason there’s a single PS/2 port, intended for use with a mouse, is that its keyboard port is a 5-pin DIN connector as used in the IBM PC AT and its descendants. This was quite a common setup in the mid- to late nineties — most socket 7 motherboards were AT boards and included these two ports (I still have a Pentium computer with this configuration), and some post-socket-7 boards continued the trend. The 5-pin DIN connector disappeared with the switch to ATX, but that ended up taking quite a long time.

Here’s a photo illustrating the two ports, from Phil Storrs PC Hardware book:

A 5-pin DIN connector next to a PS/2 connector

This isn’t strictly AT-compliant, a more common configuration was to have the PS/2 port on a bracket or another cut-out in the back of the case.

If your computer does have such a DIN port, you can use a PS/2-to-DIN adapter to connect a PS/2 keyboard to it.

  • 3
    I find it somewhat humorous that the keyboard and mouse use different pins on the same connector, and that while some computers wired the pins in parallel to allow the ports to be used interchangeably (as was the case with Apple Desktop Bus used on the Macintosh), and while ADB would allow a user to plug in two or more keyboards or pointing devices (and have them all work), the PS/2 interface wouldn't work at all if two keyboards or two mice were plugged in. – supercat Aug 25 '20 at 21:28
  • 3
    @supercat, as far as I've understood, PS/2 uses the same pins for both keyboard and mouse functions with the other two unused, so you couldn't in fact make the ports interchangeable (but you could make a splitter that allowing plugging both a keyboard and a mouse in one port that was specially made for that, I think I had laptop with such a port once.) – ilkkachu Aug 26 '20 at 4:30
  • 1
    Working as a PC techie in 1997-2000, I saw Pentium II (slot1) boards in AT format, having this 5-pin DIN keyboard connector. – Jonathan Aug 26 '20 at 8:48
  • 3
    @ilkkachu I have two systems like that; they work with either a keyboard or a mouse connected directly to the port, or both with a splitter. The port is coloured green and purple (half-and-half). – Stephen Kitt Aug 26 '20 at 18:21
  • 2
    @ilkkachu: I just checked, the ASRock FM2A88X EXTREME4+ here accepts a mouse, or a keyboard, or both. In the latter case it doesn't matter whether I connect the keyboard to the adapter plug labelled K and the mouse to the M one, or the reverse. So it definitely detects what to do (at least during boot up). The port is coloured purple for the upper half and green for the lower half. (And yes, apart from the old KVM switch, I use the PS/2 port to connect a mid-1990s mechanical Cherry keyboard which originally even had the AT plug.) – ecm Aug 26 '20 at 19:19

you already have an answer, but just some other options:

  • i think there was an adapter that allowed to plug a ps/2 device into a com-port

  • you could add an additional card that gives you another port

  • maybe the port would be available on the motherboard and just not wired to the back of the computer, so you can buy another port and attach it

  • 5
    "i think there was an adapter that allowed to plug a ps/2 device into a com-port" not exactly, there were adapters with a serial port plug and a PS/2 socket, but they only worked with dual-mode mice (which afact was most PS/2 ball mice but not PS/2 optical mice), not with keyboards. – Peter Green Aug 26 '20 at 2:00
  • 7
    "you could add an additional card that gives you another port" again no, connecting keyboards through expansion cards didn't become feasible until the USB era as the standard keyboard controller can only exist once in a given system. While you could put a PCI usb controller card in the machine and plug a USB keyboard into it said keyboard would only work when running a modern OS, it would not work in the BIOS setup. – Peter Green Aug 26 '20 at 2:04
  • 4
    "maybe the port would be available on the motherboard and just not wired to the back of the computer, so you can buy another port and attach it" again no, no manufacturer would sell a machine without a keyboard port and the keyboard port was directly on the motherboard right from the first PC. – Peter Green Aug 26 '20 at 2:06
  • 4
    Still won't work in the BIOS though. – Peter Green Aug 26 '20 at 3:34
  • 1
    @manassehkatz-Moving2Codidact: Many did, but I think serial port-based ones were probably about as common, and some devices used proprietary cards, perhaps to let the PC's CPU do more of the decoding. – supercat Aug 26 '20 at 6:31

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.