In this question, it's mentioned the Apple II's slot 7 was used by third party graphics cards. Is there any documentation on those? What were those cards and what were their capabilities?

  • 4
    Slot 7 was for third-party graphics cards that wanted to feed into an NTSC signal, but probably the most common video expansion cards were 80-column devices such as the Videoterm, which went into slot 3. NTSC output isn't that useful for 80-column text, being even lower bandwidth than PAL. But I assume you're asking mainly about cards with higher pixel resolutions or more colours, not about the slightly disjoint world of better text modes?
    – Tommy
    Commented Nov 10, 2020 at 16:48
  • 1
    Was trying to find the Apple ][ genlock card that I'm sure some local TV co-ops were using before the Amiga. No luck...
    – Brian H
    Commented Nov 10, 2020 at 17:41

3 Answers 3


There are two types of graphic cards that were produced back in the day:

  1. 80-column cards.
  2. Video enhancing graphics cards.

=== 80 Columns ===

For #1, there were a few companies that produced 80-column cards for the Apple II and II+ machines which were only capable of generating 40-column, uppercase-only text. Videx was one such company and produced cards that could generate 80-column and even 132-column displays, though this it is important to note that these cards only handled text mode - they had no effect on GR/HGR modes.

While this solved the issue of making the older II / II+ capable of displaying 80-column text, the problem was that the II's firmware only knew how to work with 40 columns. As such, it was left to the individual companies to come up with ways to do things such as clearing the screen or positioning the cursor without interfering with the Apple's normal operation. This led to incompatibilities and made it that programs needed to be specifically coded to support the cards otherwise unexpected results could occur.

Interesting to point out, these 80-column cards had separate video connectors for their output. I can't say I've seen all the cards ever produced, but I do recall that one would plug the Apple II's native composite output into the VideoTerm board which then had a separate line out which you would plug into your monitor. This was more of an automatic switch more than anything else as all screen contents were memory based and the card wasn't trying to decode the NTSC signal of the II.

To wrap up the topic on 80-column cards, be aware that the cards that went into the Apple //e's AUX slot were not graphics cards per-se, but simply RAM and firmware extensions to the machine. The ability to display 80-column text was always present on the //e's motherboard, but the card gave it the extra RAM needed for the higher density display.

=== Video Enhancing Cards ===

For #2, I'm assuming the spirit of your question was more around were there any cards that would have improved the Apple II's video capabilities beyond just displaying 80-columns or the standard GR/HGR modes. There was only one company that I was ever aware of that produced such a thing; Synetix's SuperSprite board. This was a board based on the TMS9918A video display processor which was effectively the same chip that was found in the ColecoVision, MSX, and TI-99/4 machines.

The SuperSprite board did plug into slot 7 to get access to some video signals that weren't in other slots. What it did was that it would overlay sprites on the Apple's hi-res screen. It didn't improve the underlying hi-res capabilities, but the end result was that you could get colorful, animated sprites with little-to-no load on the CPU.

Unfortunately, the board was not popular (probably due to it going for $395; about $1040 in 2020) and thus little-to-no software was ever produced for it.

If you want to find out more about the board, it appears to be supported in MESS/MAME these days as suggested on this blog. As well, there are disk images, pictures, and manuals on apple2.org.za.

=== Modern Solution ===

If we fast-forward to 2019, there is a product called the VidHD which is interesting and worth noting. While the purpose of the card is to simply add HDMI output capabilities to a slotted Apple II while maintaining complete compatibility with the machine, it also has an interesting side-benefit of being able to produce more advanced graphics modes for the older Apple II machines.

How this works is that the card operates by watching the bus and looking for accesses to the memory locations of the II that deal with video. When it observes something video related, it updates its own internal frame buffers which ultimately produce HDMI output. The trick here is that the card doesn't care whether it is being run on a ][+, unenhanced //e, or a IIgs - if it sees the right sequence of writes to specific memory locations, it is possible to trick it into displaying DHGR and even IIgs video modes on older machines.

That being said, since your question mentioned slot 7, it is worth pointing out that this card does not rely on the video signals in that slot and as such can run in any free slot (including Slot 3).

  • 1
    You might consult Adrian's Digital Basement video about the 80 column card for an Appli II youtube.com/watch?v=ukvT7131pRU&t=52s Commented Nov 11, 2020 at 13:18
  • The SuperSprite is what I was looking for. It fits the description - goes in slot 7 and is a "graphics card". Was hoping for something that took Tek 4010 commands, but I can't be too demanding with the late 70's.
    – rbanffy
    Commented Nov 13, 2020 at 10:02

One very high-resolution graphics card that could be used with Apple ][ and //e systems was the IO Research Pluto This went up to 1024x768, in up to 24-bit colour. It did not go inside the Apple case: it was a separate box, linked to an Apple ][ card by a ribbon cable. It produced a completely separate display, and didn't need to be in slot 7.

I got to play with one of these while working on the Robo BitStik CAD software. We never shipped software that used it, although we did a fair bit of development. The "RoboCAD" product for IBM PC and compatibles took precdence.


it's mentioned the Apple II's slot 7 was used by third party graphics cards.

I'm a bit suspicious here, as slot 7 wasn't any more capable for generic graphic cards than any other slot.

As Dirkt already mentioned in his answer:

[...] There's not really a lot you can do with them, except cater for some different TV encoding system.

And that's exactly the point about the additional signals (SYNC and COLOR REF). They support modification and transcoding of the existing video signal.

By default the Apple II delivers a (kind-of) NTSC compatible signal intended for direct feed to a NTSC compatible CRT/TV. If one wants to (or has to) use a different output standard (SECAM, PAL, RGB, etc.) the existing signal needs to be decoded and reencoded. To do so the card needs to be able to detect position within the video frame so the colour signal can be detected within the video signal - which is the third signal needed, provided by a pin header beside slot 7.

Of course this could as well be used to overlay the Apple II picture with additional elements, or use it as background for another video generator (like for a TMS9918). In any case the result had to stay within the same (TV like) capabilities of the Apple II signal.

A third use, light-pens, is as well based on the same effect of synchronisation.

What were those cards and what were their capabilities?

As mentioned, next to all were encoder for different video formats.

Having said that,there were of course alternative video cards, some with (for back then) extreme high resolutions like 512x384 in colour.

  • Do you have any references for these extreme high resolution cards you mentioned? I’m aware some very initial Mac development was done on IIs with such boards, but I was not aware anything like that was actually sold.
    – rbanffy
    Commented Aug 27, 2023 at 23:20

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .