I need to install Windows NT 4 on a pentium computer with Windows 98 installed on a Fat32 partition 160 GB drive. I made a 2GB Fat16 primary partition before this c partition with partition magic, hidden. I do not have CD access and would avoid the floppy drive. But there is network access. I also copied the i386 folder on the Windows 98 partition.

My problem how to install NT on the hidden partition while being on Windows 98?

Secondly, I would like to install Windows NT on a NFTS partition on the same disk.

I am normally a Mac user and strict beginner on PC.

  • 2
    Retrocomputing is not the right place for this kind of question. But to help you along, you should create the partitions first, install Win98 on the first partition as a FAT32 and then install WinNT4 on the second partition after 98 is up and running. At least that is what I think I did back in 1996.. it is possible, but 98 first, NT second. Can't help with any of the other things. – bjb Nov 30 '20 at 17:36
  • 6
    I wonder how this question could possibly be deemed ‘not about retrocomputing’. – user3840170 Nov 30 '20 at 17:42
  • 3
    @user3840170 I'm with you on this one. We've had several well-received installation questions before. The community consensus might've changed; it's probably one for Retrocomputing Meta. – wizzwizz4 Nov 30 '20 at 18:28
  • Each section of SE has a a help section which defines On- and Off-Topic. While I agree that this seems on-topic, best to read the Help. – RonJohn Nov 30 '20 at 18:29
  • Multiple operating systems on the same disk gives additional complexity. Can you install two drives instead and then one on each. – Thorbjørn Ravn Andersen Nov 30 '20 at 21:14

The 160 GB disk is the problem here. You are running into a thing called the 48bit addressing, which would limit the drive to 137 GB. You can still use the 160 gigs, if you overcome the "48BLBA", you should overcome the problem.

Windows NT does not need to be on a primary partition, and my suggestion here is to set the thing up as a small (20 MB) FAT16 partition, and the balance as an extended drive. You could have something like a 120 MB fat partition (this overcomes a DOS problem when the first partition on the extended drive is not FAT32. It is also used for data exchange between the two operating systems. If you make this over 120 MB, Windows 9x will try to change it to a fat32 partition.

Partition E can be a 2 G fat32 partition. You install Windows 9x into this partition, and it will create a small amount of files on the C: drive. My experience is because of the shared C: drive, to install different Windows into different names.

The next partition F can be an NTFS partition. If your machine is limited by the 8 GB limit, it is best to limit this drive to 2 GB also. Install NT here. It will recognise the Win9x and add it to the boot menu.

Neither of these OS versions can access past 137 GB, so the remainder would go missing, but you can create both NTFS and Fat32 partitions up there. Where you have a network, you can copy the Windows NT setup onto the D: drive, and run winnt.exe from there.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.