Even today there are companies that still make accelerators for the 68000-based Amigas, but I've never seen any such accelerator with more than 256 MiB of RAM. If the 68030+ can address 4 GiB, then why don't we ever see that configuration? Is it a limitation in Workbench, or compatibility issues with older software, or something else?


Actually, it's 256 MB only for A4000/T CPU cards - it's 128 MB for A3000/T cards.

The reason for this is that Fat Gary asserts the _RAMSLOT signal for this memory window. That way, the CPU card knows when to activate the RAM controller and to run an internal cycle.

Overcoming this limit is (probably) possible but would require a complete address decoder and overriding the decoder on the mainboard.

From The A3000 Local Bus Expansion Slot Specification:

3.5 Other Local Bus Signals

Local Slot Memory Decode (/RAMSLOT)

This is an address based chip select for the region of memory allocated to the local bus slot, $08000000-$0fffffff.


AllocEntry() sets bit 31 of the address to signal failure, so cannot indicate success for addresses beyond the 2GiB boundary. This limits AmigaOS to slightly less than 2GiB of general-purpose RAM due to ROM and I/O also sharing the space. Zorro III cards can (and do) use address space beyond 2GiB, even for RAM such as a frame buffer, so long as it's not linked into the system memory pool.

I'm not aware of any reason for a 256MiB limit, and so the lack of availability of larger boards is probably just because there's no commercial incentive to make them.


It probably has more to do with practical use and physical constraints: are there any uses that would warrant adding more than 256MB of RAM?

Emulators support up to 1.5GB of RAM, which indicates that the address space is available and that (at least some) software copes with it. The 68030 CPU has 32 physical address lines so there's certainly no limitation on that side (up to 4GB!).

  • "are there any uses that would warrant adding more than 256MB of RAM?" Web browsing. My Firefox process is currently using 1.70 GB. – snips-n-snails Dec 15 '16 at 7:35
  • 2
    It's not doing that on your Amiga though... (Web browsers on the Amiga don't use that much memory!) – Stephen Kitt Dec 15 '16 at 7:49
  • Yes, that would be difficult without virtual memory. – snips-n-snails Dec 15 '16 at 8:01
  • 1
    While I'm not sure about the Amiga in particular, it's not uncommon for systems to leave some address bits non-decoded and, for some reason, to have some of the non-decoded bits at the top of the address. If the address decoder for something in the system ignores the upper address bits, external boards will end up having multiple disjoint ranges of addresses to play with, rather than one contiguous range. – supercat Dec 15 '16 at 17:26

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.