I lost the 4 Torq (T15) screws that hold together the case for a Mac SE/30.

Does anyone know the size and the groove spacing to order a compatible one?

I found these on eBay, but I'm not sure about the winding spacing, (x10pcs) M5 x 25mm, Black, Button, Torx, Socket, Screw, ~ 10.9, T15, 5mm.

2 Answers 2


The rear case cover screws are part number 426-1007 for the top two screws ("Screw, Tap, M 4.22 x 1.41 x 16, Torx, Zinc") and 435-5002 for the bottom two ("Screw, Tap, 8-32 x .625, Torx, Blk Zinc Oxide"), per SE/30 exploded diagram and parts list entries. An #8-32 is a standard diameter and thread spacing of screw that is common in computer case screws, but I can't parse that description of the other one.

  • 3
    "M 4.22 x 1.41 x 16" looks like the notation for a metric screw thread of 4.22mm outer diameter, 1.41mm pitch, 16mm long -- but that's very much not a standard metric thread. It might be a metric description of a #8-18 UTS screw, but that's also very much not a standard size.
    – Mark
    Commented Apr 4, 2019 at 1:45
  • 1
    English-standard wood screws #8 or #6 have about the right diameter, the first specification isn't for a machine-screw thread.
    – Whit3rd
    Commented Dec 29, 2019 at 3:03

If you don't want to be as original as possible, you can use any two M4-sized (Metric) screws for the lower two holes and search a box of assorted self-tapping screws by probing the holes of the front cover without back for proper fitting.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .