Bartek Malysz
  • Member for 2 years, 8 months
  • Last seen more than a week ago
  • United Kingdom
How to get GOTEK to work with CDTV?
Accepted answer
3 votes

It requires a slight wire / connector mod: https://www.google.co.uk/amp/s/oldcrap.org/2017/11/17/gotek-in-an-external-amiga-drive-closure/amp/

View answer
How can you connect an Amiga 500/600/1000/2000 to a modern monitor?
2 votes

I would strongly recommend, if you're okay with tinkering, to just order one of the co0perdragon designs and install it internally. It's a raspberry pi 0 (not even W) powered board that you plug in ...

View answer
Amiga OS3.9 unable to run iGame error #8000000B
Accepted answer
2 votes

I resolved the issue by downloading the package again from Aminet: https://aminet.net/package/dev/misc/guigfxlib_nofpu I have used one of the online tutorials while setting it up and I believe the ...

View answer
PlayStation 2 Slim with analog A/V output having noise interference issues
1 votes

I would recommend getting decent PS2 cable with RF shielding. I had the same issue when connected to TV, even though console's audio was muted.

View answer
Fixing an ailing Amiga 500
0 votes

Get it recapped, a lot of issues with these machines are oxidised contacts (remove chips, clean and put them back again) and Caps ESRs being off range for the specs).

View answer
CF partitions not showing up in Workbench
0 votes

CF has to be removed from Windows after partitioning and WinUAE completely closed and reopened once again with Admin rights.

View answer