Skip to main content
Retrocomputing

Return to Answer

Rollback to Revision 1 - Edit approval overridden by post owner or moderator
Source Link
CJ8281
CJ8281
  • 31
  • 3

A lot of the cables that I have used just have a plastic pin pushed into the hole. It It looks like yours is this style. Take Take a straight pin and go at it from one of the corners and you should be able to dig the plastic out.

As
As others have mentioned, the old way to install the cable without the plastic cage around the pins is to find the #1 pin on the board, usually marked with a 1 or and arrow/filled in triangle pointing at pin #1. The The number 1 pin on the cable is marked with a red line, squiggles, dots or or some other way. Hope this helps.

A lot of the cables that I have used just have a plastic pin pushed into the hole. It looks like yours is this style. Take a straight pin and go at it from one of the corners and you should be able to dig the plastic out.

As others have mentioned, the old way to install the cable without the plastic cage around the pins is to find the #1 pin on the board, usually marked with a 1 or and arrow/filled in triangle pointing at pin #1. The number 1 pin on the cable is marked with a red line, squiggles, dots or some other way.

A lot of the cables that I have used just have a plastic pin pushed into the hole. It looks like yours is this style. Take a straight pin and go at it from one of the corners and you should be able to dig the plastic out.
As others have mentioned, the old way to install the cable without the plastic cage around the pins is to find the #1 pin on the board, usually marked with a 1 or and arrow/filled in triangle pointing at pin #1. The number 1 pin on the cable is marked with a red line, squiggles, dots or some other way. Hope this helps.

Copy edits and formatting.
Source Link
edit approved Jan 15, 2023 at 0:31
Giacomo1968
edit approved Jan 15, 2023 at 0:31
Giacomo1968
  • 449
  • 3
  • 9

A lot of the cables that I have used just have a plastic pin pushed into the hole. ItIt looks like yours is this style. TakeTake a straight pin and go at it from one of the corners and you should be able to dig the plastic out.
As

As others have mentioned, the old way to install the cable without the plastic cage around the pins is to find the #1 pin on the board, usually marked with a 1 or and arrow/filled in triangle pointing at pin #1. TheThe number 1 pin on the cable is marked with a red line, squiggles, dots oror some other way. Hope this helps.

A lot of the cables that I have used just have a plastic pin pushed into the hole. It looks like yours is this style. Take a straight pin and go at it from one of the corners and you should be able to dig the plastic out.
As others have mentioned, the old way to install the cable without the plastic cage around the pins is to find the #1 pin on the board, usually marked with a 1 or and arrow/filled in triangle pointing at pin #1. The number 1 pin on the cable is marked with a red line, squiggles, dots or some other way. Hope this helps.

A lot of the cables that I have used just have a plastic pin pushed into the hole. It looks like yours is this style. Take a straight pin and go at it from one of the corners and you should be able to dig the plastic out.

As others have mentioned, the old way to install the cable without the plastic cage around the pins is to find the #1 pin on the board, usually marked with a 1 or and arrow/filled in triangle pointing at pin #1. The number 1 pin on the cable is marked with a red line, squiggles, dots or some other way.

Source Link
CJ8281
CJ8281
  • 31
  • 3

A lot of the cables that I have used just have a plastic pin pushed into the hole. It looks like yours is this style. Take a straight pin and go at it from one of the corners and you should be able to dig the plastic out.
As others have mentioned, the old way to install the cable without the plastic cage around the pins is to find the #1 pin on the board, usually marked with a 1 or and arrow/filled in triangle pointing at pin #1. The number 1 pin on the cable is marked with a red line, squiggles, dots or some other way. Hope this helps.