Timeline for Why not SCART for early color monitors
Current License: CC BY-SA 4.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 28 at 10:40 | comment | added | Kaz | @PeterGreen Agreed; answer clarified to note that only the adjacent DIN input on this monitor was for TTL input levels. | |
| Jul 28 at 10:37 | history | edited | Kaz | CC BY-SA 4.0 |
Correct reference to TTL inputs
|
| Jun 18 at 19:05 | comment | added | Peter Green | nitpicks: 1. Scart is not TTL RGB, it's RGB mode is analog RGB at "video" signal levels and 75 ohm impedance. You can connect a TTL RGB source to scart, but you should use resistors to avoid overdriving and reduce the load on the signal source. 2. The Archimedes had analogue RGB output, unlike the BBC micro which was TTL. | |
| Apr 4, 2021 at 16:46 | comment | added | Jukka Aho | The Philips CM8833, the Commodore 1081, and the Commodore 1084 — all made by Philips and closely related in their design — were popular 15 kHz RGB/CVBS computer monitor models sold all over Europe. They were often bundled with the early 16/32-bit systems such as the various models of the Commodore Amiga, Acorn Archimedes, or Atari ST. There were many variants of these monitors with different back-panel connector configurations but the SCART connector was commonly populated and the bundled systems then came with an appropriate, RGB-capable SCART monitor cable, which could also be used with TVs. | |
| Dec 10, 2018 at 14:59 | history | answered | Kaz | CC BY-SA 4.0 |